Mother nature can be cruel when is comes to weather station electronics, cooking then in high summer at 50C with the full sun and freezing to -10C with a harsh winter. 

At Weather Spares we've got you covered. We stock a large range of spares and repair parts across the range of weather stations. Whether it be a small plastic clip that has been broken during maintenance to a larger replacement part or sensor.

If you cannot find what you are looking for, then please do contact us and we will do our upmost to help.

Spare & Repair Parts

£2.00
Replacement Reed Switch for Rain Tipping Bucket Davis 7120.031
Replacement reed switch for rain collector tipping bucket mechanisms for a number of manufacturers (see lists below). Can be used...
£3.00
Davis Vantage Vue Rain Debris Screen 7342.199
Suitable to replace a damaged or lost rain debris shield on the Davis Vantage Vue Sensor suite (6357). Clips directly...
£2.00
Davis 0.05" Allen Key / Hex Key 7802.090
This is the 0.05" hex key used to tighten the wind cups, and weather vane for the Davis series of...
£4.00
Davis External Transmitter Battery CR123A 3v
*** This item cannot be shipped outside of the UK *** New and supplied individually in retail packaging. Suitable for...
£8.00
Davis Vantage Pro2 Transmitter Super Capacitor and PDF instructions (self install)
A Davis compatible super-capacitor with fitting and testing instructions for the product. We also include a digital download of installation...
£2.00
Davis Reed Switch for Anemometer Wind Speed module
Replacement reed switch for Davis anemometers built between spring 2003 and 2015.The reed switch was used in all models of...
BACK SOON
Oregon Scientific Anemometer Wind Speed Bearing Weather Spares
£12.00
Oregon Scientific Anemometer Wind Speed Bearing
Oregon Scientific Anemometer Wind Speed Bearing A replacement bearing suitable for a number of Oregon Scientific anemometers within the WMR range...
£12.00 - Special Offer
Oregon Scientific EMR211X Console Only
Oregon Scientific EMR211X (Celsius) Weather@Home Wireless Display Only with Bluetooth connectivity. This EMR211X display is only suitable for use with the THN132N...
£12.00
Davis Debris Screen and Bird Spikes 7345.530
Now in stock spare spikes and screen for the greatly improved Davis rain bucket or AeroCone model. Supplied item:  Replacement...
£14.00
Davis Antenna for Pro2/Vue console or ISS 7367.211
Davis replacement 868MHz antenna for Pro2 or Vue console, or externals ISS units designed for use in the UK or...
£4.00
Davis Vantage Vue Rear Kick Stand 7342.184
Damaged or broken kick stand? This is a new and unused replacement rear kick stand for the Davis Vantage Vue...
£12.00
Davis Temperature & Humidity Sensor Cap Filter 7345.041
This replacement screen for the temperature / humidity sensor fits the Vantage Pro, Pro2 and Vue weather stations and is...
£12.00
Oregon Scientific PROJi 3.6v UK Power Adapter
Oregon Scientific replacement projection clock power adapter. An original Oregon Scientific power adapter for a number of projection clocks and weather...
£12.00
Davis USB Power Cable (1.8 meter) 6627
Davis weather station console / Envoy USB power cable (6627). Features right angled power cable approx 1.8m cable length and...
£10.00
Davis Sensor Suite Mounting set
A difficult to obtain mounting U bolt for the Davis range of weather instruments and sensors. Suitable for mounting the...
£4.00 - Special Offer
Davis ISS Transmitter Rear Mounting Clip 7342.044
During maintenance and cleaning, the clip that mounts the wireless transmitter onto the Sensor Suite may become brittle and break,...
£2.00
Davis Sensor Suite Foam Insert 7342.056
For use with all Pro and Pro2 external sensor suites to reduce the likelihood of small insects and bugs entering...
£5.00
Davis Rain Cone Anti-bird Spikes 7353.274
Spare spikes for the greatly improved rain bucket which fits both the original style and AeroCone rain collection bucket.
£4.00
Davis Vantage Pro / Pro2 Rain Tipping Bucket Rod 7353.029
Tipping bucket pivot rod. This replacement tipping bucket rod is a suitable replacement for the Davis Vantage Pro, Pro2 or...
£2.00
Energizer Lithium AA - Single 1.5v Battery
Recommended for all external weather station sensors where temperature may near or drop below freezing. Energizer Ultimate Lithium AA batteries are designed...
£4.00
Davis Vantage Pro / Pro2 Rain Tipping Bucket Magnet 7120.037
Tipping bucket magnet is a suitable replacement for the Davis Vantage Pro, Pro2 or Weather Wizard stations. Is suspended under the...
£2.00
Davis Anemometer Cup or Vane Hex Bolt
Replacement grub screw used to secure the Davis Vue, Pro and Pro2 anemometer wind cups or vane.Supplied individually.
£2.00
Davis Console / AirLink Feet 7342.801
This kit comprised a set of two replacement rubber feet and two adhesive clear feet. The two rubber feet attach...
£14.00
Davis WeatherLink USB Cable
Replacement cable to connect Davis WeatherLink USB data logger to a PC.
£14.00
Davis Vantage Pro / Pro2 Rain Tipping Bucket 7342.038
A worn coating on a Davis tipping bucket can lead to inaccuracies in rain measurement. This replacement tipping bucket is...
£7.00
Davis Vantage Pro / Pro2 Console Kick Stand 7342.704
Damaged or broken kick stand? This is a new and unused replacement rear kick stand for the Davis Vantage Pro...
£7.00
Davis Vantage Pro / Pro2 Console Hinge Arm 7342.703
Damaged or broken hinge arm? This is a new and unused replacement rear hinge arm for the Davis Vantage Pro...
£8.00
Davis Pro2 Console LCD Ribbon Cable
Replacement slim fit ribbon cable for Davis Vantage Pro or Pro2 console.  
£14.00
Oregon Scientific WMR Sensor Mounting Arm
Oregon Scientific Sensor Mounting ArmReplacement mounting arm for the following components: THGN801 Temperature Sensor WGR800 Anemometer WGR800X Anemometer 
£10.00
Oregon Scientific Sensor Wall Mount
Replacement wall mounting for a number of Oregon sensors including: THGR800 THGR810 THGN800
£2.00
Energizer Lithium AAA - Single 1.5v Battery
Recommended for all external weather station sensors where temperature may near or drop below freezing. Energizer Ultimate Lithium AAA batteries are designed...
£12.00
Davis 24 Hour FARS Circuit Board Cover 7342.514
Davis 24 hour FARS circuit board cover. Used to protect the charging circuitry from the elements. Clips into place.
£5.00
Davis Rain Reed Switch Cover 7342.030
Replacement reed switch cover for rain collector tipping bucket in all wireless and cabled Vantage Pro2, original Vantage Pro, Weather...
£12.00
Davis Vantage Pro2 Open Radiation Shield Plate 7342.236
Davis open radiation shield plate for Vantage Pro2 range of equipment as highlighted on Pro2 radiation shield diagram with red arrows....
£10.00
Davis Insulating Blanket for Rain Bucket Heater 7328.015
Davis Insulated Blanket for Rain Collection Bucket Heater 7328.015Replacement insulated blanket to replace the item supplied with the Rain Collection...
£8.00
Davis Vantage Pro2 Battery Cover 7342.702
Davis Vantage Pro / Pro2 battery cover for console.
£5.00 - Special Offer
Davis Hinged Shelter Rubber Grommet 7342.800
Large rubber grommet fitting into the rear casing of the transmitter suitable for use with the following stations: Anemometer Transmitter....
£0.60
Panasonic AAA Alkaline Battery 1.5v
Recommended for weather station sensors and consoles. Sold individually so that you can purchase just what you require for your...
BACK SOON
Oregon Scientific STC800 replacement NiMH battery Weather Spares
£12.00
Oregon Scientific STC800 replacement NiMH battery
A replacement rechargeable battery for use with the Oregon Scientific STC800 solar power source.  Simple installation with six screws and...
£12.00
Davis Vantage anemometer arm 2013 onward 7388.008
Davis Anemometer Arm for use with the Pro2 products after 2013 which have the separate windspeed bearing cartridge (see second photo for...
£7.00
Davis RJ12 Coupler 7956
Davis single RJ12 6 connection cable coupler for all Davis Pro and Pro2 weather station sensors. Must be used in...
£3.00
Davis 24 Hour FARS Male / Female Stand Off 7350.787
Davis 24 hour FARS internal male / female spacer.  This part sits below the 24 hour FARS solar panel plate and...
£12.00
Davis 24 Hour FARS Lower Screen 7345.023
Lower filter screen for Davis 24 hour FARS.
£10.00
Davis 24 Hour FARS Sensor Mounting Plate 7353.065
Davis 24 Hour FARS Temperature Humidity Sensor Mounting Plate including plastic mounting pillars.
£3.00
Davis Anemometer Mounting Arm Screw Set DASS1
Davis Vantage Pro / Pro2 mounting base screw set for anemometer.This nut, bolt and washer is used to hold the...
£2.00
Davis Daytime FARS Top Screw 3.25" length
Replacement 3.25" screw used to go through the rain collector, the two top plates and attach to the internal fixings of...
£10.00
Davis Vantage Pro2 Solar / UV Sensor Fixing Set
Davis set of mounting parts used to attach the UV and Solar radiation sensors to the mounting bracket through their covers....
£12.00
Davis 24 Hour FARS Fan Deflector 7342.504
Fan chamber deflector for a Vantage Pro2 24 hour fan assisted radiation shield.
£2.00
Davis Antenna Retaining Clip 7342.092
Replacement Plastic Clip for Wireless Davis Transmitters 7342.092New and unused antenna grommet retainer for Davis Vantage Pro and Pro2 wireless...
£11.00
Davis Vantage Pro2 Rubber Console Keys 7346.050
Sometimes the keys on a console will stop working, of become intermittent - especially in more harsh environments. This is...
£4.00
Davis Rain Tipping Bucket Metric Adapter 7342.024
Davis Vantage Pro2 / Pro / Rain Tipping Bucket Metric Adapter. A difficult to get hold of part in Europe....
£5.00
Ecowitt Mounting Screw for Sonic Anemometer WS80 Head
Replacement mounting screw for the WS80 sonic anemometer sensor head. A single screw which is partly threaded to attached the...
£14.00
Davis USB Power Cable 6628 (7.5 meter)
Davis right angled power cable 7.5m cable length and a USB connector for your own power supply / outlet.  Suitable...
£0.65
Panasonic AA Alkaline Battery 1.5v
Recommended for weather station sensors and consoles. Sold individually so that you can purchase just what you require for your...
£4.00
Davis 24 Hour FARS Top Screw 7350.017
Davis 24 hour FARS 1.25 inch 8*32 threaded screw, 3 required per installation. This screw is used to secure the rain...
£7.00
Oregon Scientific RAR502 Range Battery Cover
Oregon Scientific RAR502 range weather station battery cover.A replacement plastic cover in black which clips into place holding the batteries securely. Suitable...
£9.00
Oregon Scientific RAR502 Kick Stand
Oregon Scientific RAR502 range weather station console stand.A replacement plastic stand in black which clips into place to hold the console...
£4.00
Davis 24 Hour FARS Shield Spacer 7350.015
Davis 24 hour FARS shield spacer.  This part sits between the 24 hour FARS solar panel and the rain tipping base....
£4.00
Davis Vantage Pro / Pro2 Rain Base Grommet
Replacement grommet for rain pole mount bases. Used to seal around the cable entry hole that connects the tipping bucket...
£11.00
Rain Gauge Debris Screen
Suitable to replace a damaged or lost rain debris shield on the oval TFA rain gauge.  Colour is white / cream....
£14.00
Davis Vantage Pro2 Closed Radiation Shield Plate with threaded stud 7342.098
Davis closed radiation shield plate with metal threaded stud for Vantage Pro2 range of equipment. Close plate with the metal threaded...
£15.00
Davis Vantage Pro2 Closed Radiation Shield Plate without thread 7342.099
Davis closed radiation shield plate for Vantage Pro2 range of equipment. Closed plate without the metal threaded studs  as highlighted...
£10.00
Davis 24 Hour FARS Battery Cover 7342.509
Replacement battery cover for the Davis 24 Hour Fan Assisted Radiation Shield. Supplied individually.
£10.00
Davis Vantage Pro2 Radiation Shield Baffle 7342.040
Davis Vantage Pro2 radiation shield baffle for the temperature / humidity sensor. Made of composite material and includes the two...
£12.00
Davis Vantage anemometer arm Pre 2013 7388.008
Davis Anemometer Arm for use with Pro and early Pro2 products prior to 2013 which do not have the separate...
£5.00
Davis FARS Battery O Ring 7354.003
Davis replacement O Ring which is used to create a seal between the 24 hour FARS  battery case and cover....
£14.00
Davis FARS Cable Assembly 7330.001
Replacement Davis aspirator fan cable. 3 pin connector at fan end enclosed in black housing and 2 pin connector at...
£12.00
Ventus W266 Rain Bucket
Broken of damaged rain bucket? This replacement rain bucket is a replacement for the W266 unit used on the external sensor unit....
£6.00
Ventus W266 External Sensor Battery Cover
The external battery cover has a unique design to stop water entering the battery compartment. This replacement kit also includes...
£12.00
Davis Waterproof Crimp Coupler Set 7960
Pack of 20 waterproof crimp connectors from Davis instruments. Suitable for joining external cabling for Davis products.
£26.00
Davis Vantage Pro2 Console Front Case 7342.073
Davis console plastic front case to contain LCD, rubberised buttons, and controlling PCB, suitable for Vantage Pro / Pro 2...
£8.00
Davis Vantage Vue Console Battery Cover 7342.185
A replacement rear battery cover for the Davis Vantage Vue console, to replace either a broken or damaged unit.