Davis Wireless PCB for ISS transmitter Weatherspares.co.uk

Davis Vantage Pro2 Wireless ISS Transmitter pre 2016 PCB Only for 7345.978

Manufacturer Davis Instruments

Available

UK delivery between &

Replacement Wireless Vantage Pro2 ISS PCB and connected antenna for transmitters built prior to December 2016. Wireless model for use within the UK and European Union. Suitable for all model of Pro2 and a number of ex......
£159.00



Replacement Wireless Vantage Pro2 ISS PCB and connected antenna for transmitters built prior to December 2016. Wireless model for use within the UK and European Union. Suitable for all model of Pro2 and a number of external sensor transmitters that have the the 5 sensor connectors.

  • Operating Temperature: -40F to +150F (-40F to +65C)
  • Battery Life (3-Volt Lithium cell): 8 months without sunlight - greater than 2 years depending on solar charging at installed location
  • Connectors, Sensor: Modular RJ-11 Wind / Rain / Temp / UV / Solar
  • Transmit Frequency: 868.0 - 868.6 MHz FHSS
  • ID Codes Available: 8
  • Range: Line of Sight up to 1000 feet (300 m)

    In January 2016 a revision was made to the PCB to support the latest high accuracy temperature / humidity sensor.  If this PCB transmitter is used to send temperature data from a unit manufactured after 1st January 2016 a small offset of 0.5C will need to be applied at the console - full details below video.

    White internal cover descriptions may vary, but a suitable replacement PCBA (printed circuit board assembly) for wireless Vantage Pro2 and Vantage Pro2 Plus Integrated Sensor Suites, Wireless Temperature Station (6372), Wireless Temperature/Humidity Station (6382), and for Anemometer Transmitter Kit (6332).

    Installation video from Davis below:

    If you are replacing a December 2015 or later transmitter with this unit and are using a temperature sensor also from after December 2015 you will need to make an offset adjustment on the Davis console reducing the temperature reading by 0.5C (0.9F) to prevent a lower than expected value. 

    To identify the age of your transmitter. Check the manufacturing code on the transmitter white panel above the sensor connectors. This will consist of 1 or 2 letters followed by 6 numbers. The number format is YYMMDD, so a transmitter with 120213 would be 13th February 2012. On transmitters before 2011 a single digit was used YMMDD.

    Customer Reviews

    Based on 1 review Write a review

    QUESTIONS & ANSWERS

    Have a Question?

    Be the first to ask a question about the Davis Vantage Pro2 Wireless ISS Transmitter pre 2016 PCB Only for 7345.978

    Ask a Question

    UK Shipping & Delivery

    • Economy Delivery (£4.20 or free on orders over £75.00) 2 to 4 working days
    • Standard Delivery (£5.90) normally next day for mainland UK
    • Express Delivery (£8.95) guaranteed next working day for mainland UK. Highland and Islands, Northern Island 2 to 3 working days. Available on orders placed before 11am

    Europe & Rest of World Shipping & Delivery

    • Europe (from £4.50) per order
    • Rest of the World (from £9.60) per order

    Please note that there may be local import duties (VAT/TVA) to be paid on before receipt of your goods from your local customs agent.

    .

    Our full shipping policy can be read here.