{"title":"Ecowitt 1yr warranty","description":"","products":[{"product_id":"uk-usb-power-adapter-5v","title":"UK USB Power Adapter 5v","description":"\u003cp\u003eStandard USB power adapter for use with a number of weather station products.\u003c\/p\u003e\n\u003cp\u003e5V \/ 2 Amp output\u003c\/p\u003e\n\u003cp\u003eUK CE approved\u003c\/p\u003e\n\u003cp\u003eRequired for the Ecowitt models that incorporate the a gateway device (GWXXXX)\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":30307878568032,"sku":"GENUSBPSU5V","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/UK_USB_Power_Adapter_5v_33f34233-1d71-daa6-3e14-2703bd70162a-compressed.webp?v=1779119888"},{"product_id":"garni-940-wind-cups-940w","title":"Sensor Wind Cups (Ambient, Ecowitt, Ventus etc, see description)","description":"\u003cp\u003eA replacement wind cups for a range of weather station external sensor packs.\u003c\/p\u003e\n\u003cp\u003eAlso suitable for some stations from the following manufacturers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAlecto WS550\u003c\/li\u003e\n\u003cli\u003eAmbient Weather WS-2902C, WS-2000, WS-1900 Osprey, WS-1900-IP\u003c\/li\u003e\n\u003cli\u003eEcowitt range WS2910, GW1101, GW1102 HP2551, HP2552, WS68, WS69 etc\u003c\/li\u003e\n\u003cli\u003eGARNI 940\u003c\/li\u003e\n\u003cli\u003eOregon Scientific WMR580 \/ AL580 Sensor\u003c\/li\u003e\n\u003cli\u003eSainlogic WS3500\u003c\/li\u003e\n\u003cli\u003eVentus W830\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eComprises plastic cups and pre installed fixing screw.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eHow to install\u003c\/h5\u003e\n\u003col\u003e\n\u003cli\u003eMove the sensor suite to a safe working level if necessary noting it's orientation before removal.\u003c\/li\u003e\n\u003cli\u003eLocate the small cross head screw on the side of the existing wind cups, unless these are missing, and loosen. There is no need to fully remove the screw.\u003c\/li\u003e\n\u003cli\u003ePull the cups straight up to remove.\u003c\/li\u003e\n\u003cli\u003eEnsure the screw on the new cups is loosened enough that these can be pushed onto the shaft. There is no correct orientation.\u003c\/li\u003e\n\u003cli\u003eTighten the wind cups using the screw on the side until this grips the metal shaft. A gentle pull up will ensure they are secure.\u003c\/li\u003e\n\u003cli\u003eTest by spinning and checking a reading registers.\u003c\/li\u003e\n\u003cli\u003eReturn the sensor suite to its original location and orientation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":32255758860384,"sku":"GARWCUP","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Wind_cups-_small-for-various-station-weatherspares.webp?v=1779120375"},{"product_id":"ecowitt-sensor-wind-vane-see-description","title":"Ecowitt Wind Direction Vane","description":"\u003cp\u003eA replacement wind vane for a number of Ecowitt and Froggit weather station external sensor packs and anemometers.\u003c\/p\u003e\n\u003cp\u003eSuitable for use with the following Ecowitt models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGW1001 \u003c\/li\u003e\n\u003cli\u003eGW1002\u003c\/li\u003e\n\u003cli\u003eGW1101\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eGW1102\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eHP2551\u003c\/li\u003e\n\u003cli\u003eHP3500B\u003c\/li\u003e\n\u003cli\u003eHP3501\u003c\/li\u003e\n\u003cli\u003eWH2320\u003c\/li\u003e\n\u003cli\u003eWS6006\u003c\/li\u003e\n\u003cli\u003eWS68 sensor pack\u003c\/li\u003e\n\u003cli\u003eWS69 sensor pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eComprises plastic vane and fixing screw\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":40989967974563,"sku":"ECOWVANE","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Wind_Direction_Vane_a473470f-7561-1081-7b16-696ed4f60345-compressed.webp?v=1779121632"},{"product_id":"rain-bucket-debris-screen-upgrade-kit","title":"Rain Funnel Debris Filter to Reduce Blockages","description":"\u003cp\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003eAdd the clip in rain debris spring to your rain bucket to reduce debris blocking the tipping mechanism and drain hole. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003eInstalling a debris screen ensures that rain rates are measured more accurately as the screen keeps the bucket drain hole clearer allowing for an unobstructed flow. The debris spring includes a hook mechanism to prevent the screen blowing out in strong winds.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003eSuitable use with any round rain bucket including Ventus, Ecowitt \u0026amp; GARNI technology.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003eIncluded\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003e1 x  stainless steel locking rain filter \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003e(Rain bucket not included)\u003c\/span\u003e\u003cbr\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":41442667462819,"sku":"ECOWRAINDEBRIS","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Rain_Funnel_Debris_Filter_to_Reduce_Blockages_cb7d6bd2-a781-2497-0b18-698a41d6a6bd-compressed.webp?v=1779121819"},{"product_id":"ecowitt-metal-sonic-anemometer-arm-for-ws80","title":"Ecowitt Metal Arm for Sonic Anemometer WS80","description":"\u003cp\u003eReplacement metal arm for mounting the WS80 sonic anemometer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHas two holes pre drilled for fitting screws, and rubber seals to reduce rusting -fittings not included.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42652760735960,"sku":"ECOWSONARM","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Metal_Arm_for_Sonic_Anemometer_WS80_ed72bbbb-3f91-6301-56f1-3c39d091211b-compressed.webp?v=1779122230"},{"product_id":"ecowitt-pole-attachment-for-sonic-anemometer-ws80","title":"Ecowitt pole attachment for Sonic Anemometer WS80","description":"\u003cp\u003eReplacement pole mounting the WS80 sonic anemometer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eHas four holes pre drilled for fitting to the pole along with the fixing screw to hold the WS80 anemometer arm in place and stop it rotating.\u003c\/p\u003e\n\u003cp\u003eNo additional metal fittings are included.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42652793929944,"sku":"ECOWSONICBASE","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_pole_attachment_for_Sonic_Anemometer_WS80_c2505f07-088b-0be1-1324-c873675d88a2-compressed.webp?v=1779122229"},{"product_id":"ecowitt-mountingsscrew-for-sonic-anemometer-ws80-head","title":"Ecowitt Mounting Screw for Sonic Anemometer WS80 Head","description":"\u003cp\u003eReplacement mounting screw for the WS80 sonic anemometer sensor head.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eA single screw which is partly threaded to attached the sonic anemometer sensor head the the metal mounting pole - additional fittings not included.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42652900950232,"sku":"ECOWSONICSCREW","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Mounting_Screw_for_Sonic_Anemometer_WS80_Head_8f5d3976-e416-4d03-67e9-0af5bb3c8ca4-compressed.webp?v=1779122229"},{"product_id":"sensor-mounting-hardware-for-various-outdoor-sensors","title":"Sensor Mounting Hardware for Various Outdoor Sensors","description":"\u003cp\u003eGeneric sensor mounting hardware suitable for a number of external sensors as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEcowitt\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eGW1101 \/ 1001 sensor array\u003c\/li\u003e\n\u003cli\u003eHP2551 sensor array\u003c\/li\u003e\n\u003cli\u003eWN1900 sensor array\u003c\/li\u003e\n\u003cli\u003eWS2910 sensor array\u003c\/li\u003e\n\u003cli\u003eWH40 rain gauge\u003c\/li\u003e\n\u003cli\u003eWN67 sensor array\u003c\/li\u003e\n\u003cli\u003eWS68 anemometer\u003c\/li\u003e\n\u003cli\u003eWS69 sensor array\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eGARNI 940 sensor array\u003c\/li\u003e\n\u003cli\u003eVentus W830 sensor array\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 U bolts\u003c\/li\u003e\n\u003cli\u003e4 fixing bolts\u003c\/li\u003e\n\u003cli\u003e1 x mounting plate\u003c\/li\u003e\n\u003cli\u003eSpanner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eNot all parts may be required for all sensors\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42652922085592,"sku":"GENERICSENSORKIT","price":17.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Sensor_Mounting_Hardware_for_Various_Outdoor_Sensors_72332a7f-f0a0-8dba-98a9-794e6ab83420-compressed.webp?v=1779122234"},{"product_id":"ecowitt-temperature-humidity-sensor-for-sonic-anemometer-ws80","title":"Ecowitt Temperature \u0026 Humidity Sensor (Blue - type 3)","description":"\u003cp\u003e\u003cstrong\u003eIf your product uses a blue plug in sensor then this has been replaced with an improved model.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new model has more robust shielding to protect the temperature and humidity sensor.\u003c\/p\u003e\n\u003cp\u003eFor the WS69 or WS80 sensor array, please \u003ca href=\"https:\/\/weatherspares.co.uk\/products\/copy-of-ecowitt-temperature-humidity-sensor-with-blue-plug-type-3-see-description-for-compatibility\"\u003esee this product link.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor the WS90 sensor array, please \u003ca href=\"https:\/\/weatherspares.co.uk\/products\/copy-of-ecowitt-temperature-humidity-sensor-blue-plug-type-4s-see-description-for-compatibility\"\u003esee this product link.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42771377422552,"sku":"ECOWBLUETEMPHUM","price":29.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Temperature__Humidity_Sensor_Blue_-_type_3_7e6a1a2e-96ce-211c-b820-96ed0ccf2d05-compressed.webp?v=1779122349"},{"product_id":"ecowitt-temperature-humidity-sensor-for-sonic-anemometer-ws80-type-2","title":"Ecowitt Temperature \u0026 Humidity Sensor for Sonic Anemometer (Black - type 2)","description":"\u003cp\u003ePlug in temperature and humidity sensor for Ecowitt Sonic anemometer. \u003c\/p\u003e\n\u003cp\u003eOriginal black plug version with offset pins and notch design to prevent incorrect insertion. Filter cover in white may vary in design on newer model.\u003c\/p\u003e\n\u003cp\u003ePlease ensure that your existing sonic anemometer sensor is this style sensor as per the photo (black plug and socket with red gasket) to ensure compatibility.\u003c\/p\u003e\n\u003cp\u003eEasily replaced part by removing two screws on the underside of the heat shield and removing the lower plates(1) . \u003cstrong\u003eEnsure that you do not handle the sensor with bare hands to prevent contamination and gently wiggle and pull to remove.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42781407871192,"sku":"ECO-WS80MTH-001","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Temperature__Humidity_Sensor_for_Sonic_Anemometer_Black_-_type_2_bcdd937b-fca2-441b-c76f-ca7b46e36257-compressed.webp?v=1779122360"},{"product_id":"ecowitt-temperature-humidity-sensor-for-wh65-ws69","title":"Temperature \u0026 Humidity Array Plate Sensor (type 1 - see description for compatibility)","description":"\u003cp\u003e\u003cstrong\u003eNew version of this product with improved sensor protection and a plug-in sensor available \u003ca href=\"https:\/\/weatherspares.co.uk\/products\/temperature-humidity-array-plate-sensor-type-1-see-description-for-compatibility-copy\" title=\"Link to new type 1 upgraded sensor\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlate style temperature and humidity sensor for older Ecowitt WH65, WN67 or WS69 sensor array where the sensor is glued to the plate. Also suitable for a number of Ventus, GARNI and Ambient multi-sensor arrays (\u003cspan style=\"text-decoration: underline;\"\u003ecannot be used with Bresser weather stations or Ecowitt WS80 or WS90 models\u003c\/span\u003e).\u003c\/p\u003e\n\u003cp\u003ePlease ensure that your existing sensor is this plate style part as per the image to ensure compatibility and that it is a plug-in sensor connector.\u003c\/p\u003e\n\u003cp\u003eEnsure that you do not handle the sensor cloth filter with bare hands to prevent contamination. The cloth filter should not be removed.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42781419929816,"sku":"WH65MTH-FOS01","price":27.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Temperature__Humidity_Array_Plate_Sensor_type_1_-_see_description_for_compatibility_5a38df3b-2d0c-004f-dc65-79447645fae6-compressed.webp?v=1779122409"},{"product_id":"anemometer-sensor-for-ecowitt-wn67-ws69","title":"Ecowitt Anemometer Sensor for WN67 \/ WS69","description":"\u003cp\u003eWind speed and wind direction sensor for Ecowitt WN67 or WS69 sensor array.  Only suitable for the I shaped array with wind direction and speed mounted above each other.\u003c\/p\u003e\n\u003cp\u003eEasily fitted by removing one large nut\/bolt and then a smaller locking screw within the main arm. Bottom section them twists off to reveal two cables releasing the anemometer sensor array. Ensure the two cables are marked to reassemble as they are identical, see photo for original factory marking in black.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42781778673880,"sku":"GENRC-i-Anemoemter","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/1e11c7f02ee20fdc6fc03cb4459d610d-compressed.webp?v=1779122413"},{"product_id":"uk-5v-power-adapter-for-weather-stations-see-description","title":"UK 5v Power Adapter for Weather Station Console (see description)","description":"\u003cp\u003eA replacement 5v power adapter for a number of weather station consoles. UK version and CE approved product combining the USB power cable and \u003c\/p\u003e\n\u003cp\u003eSuitable for use with the following weather station consoles models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEcowitt HP2550, HP2560 TFT console\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEcowitt WS2320, WS2910, WS3800, WS3900, WS3910 LCD console\u003c\/li\u003e\n\u003cli\u003eEcowitt GW2000 gateway\u003c\/li\u003e\n\u003cli\u003eGARNI 940\u003c\/li\u003e\n\u003cli\u003eVentus W830 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e Image representative of adapter. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":42999048601816,"sku":"ECO5VPSUUK","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/UK_5v_Power_Adapter_for_Weather_Station_Console_see_description_91cdedee-663a-890d-50a5-69dd9b120f42-compressed.webp?v=1779122529"},{"product_id":"ecowitt-mounting-bracket-for-wn34l-or-wn34s","title":"Ecowitt Mounting Bracket for WN34 or WH51L","description":"\u003cp\u003eReplacement mounting bracket for the Ecowitt liquid or soil sensors, WN34L, WN34S or WH51L.\u003c\/p\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eL Bracket with Screw\u003c\/li\u003e\n\u003cli\u003eJubilee Clip\u003c\/li\u003e\n\u003cli\u003eSecuring Nut\u003c\/li\u003e\n\u003cli\u003eRubber Sucker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43398681166040,"sku":"ECOWWN34PLAT","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Mounting_Bracket_for_WN34_or_WH51L_0aa76de6-c8ce-1ed0-5131-b11d4f84926d_10f22e0d054c555f-compressed.webp?v=1779122659"},{"product_id":"ecowitt-ultrasonic-anemometer-heater-cable-10m-no-power-supply","title":"Ecowitt Ultrasonic Anemometer Heater Cable (No power supply)","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eA replacement cable provides power for the heater element in the Ecowitt Ultrasonic anemometer - does not include power supply. \u003c\/p\u003e\n\u003cp\u003eThis cable is suitable for use with the following units which include the sonic anemometer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWS80\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWS90 (WittBoy)\u003c\/li\u003e\n\u003cli\u003eHP2553\u003c\/li\u003e\n\u003cli\u003eGW1003\u003c\/li\u003e\n\u003cli\u003eGW1103\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires a 12 volt 1 amp power supply for either the DIY cable or the pre-wired 20m and 10m cables.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan face=\"arial, helvetica, sans-serif\"\u003e10m or 20m low voltage cable with waterproof connectors\u003c\/span\u003e as selected\u003c\/li\u003e\n\u003cli\u003eor 3m cable with two colour coded wires to connect to your own power supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ecowitt","offers":[{"title":"10m cable","offer_id":43775145050328,"sku":"ECO10m12V","price":29.0,"currency_code":"GBP","in_stock":true},{"title":"20m cable","offer_id":43775145083096,"sku":"ECO20m12V","price":45.0,"currency_code":"GBP","in_stock":true},{"title":"3m DIY cable (plug to bare ends)","offer_id":54915276603770,"sku":"ECO3mDIY","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Ultrasonic_Anemometer_Heater_Cable_No_power_supply_6fb1fcc4-8d5b-5aa0-0e6c-94cdc7d8f62d-compressed.webp?v=1779122665"},{"product_id":"ecowitt-wh51-cap-cover-for-soil-moisture-sensor","title":"Ecowitt WH51 Cap Covers for Soil Moisture Sensor","description":"\u003cdiv\u003eGive additional protection to the WH51 soil moisture sensor with the battery compartment cover. Protects from rain or irrigation water ingress.\u003c\/div\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\u003c\/ol\u003e\n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 x small soft cover to sensor top\u003c\/li\u003e\n\u003cli\u003e1 x larger soft cover for battery cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43443469680856,"sku":"ECOWWH51COV","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_WH51_Cap_Covers_for_Soil_Moisture_Sensor-compressed.webp?v=1779122713"},{"product_id":"ecowitt-sonic-anemometer-battery-cover","title":"Ecowitt Sonic Sensor Array Battery Cover","description":"\u003cp\u003eReplacement AA battery cover for the Ecowitt sonic sensor array models.  Includes fixing screw and green waterproof seal to keep water out even in the strongest wind and rain.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43486216257752,"sku":"ECOWBATTCOV","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Sonic_Sensor_Array_Battery_Cover_861995b8-c4a1-61b1-883f-081a2b201ee7_622bf60ce57de033-compressed.webp?v=1779122717"},{"product_id":"ecowitt-sensor-mounting-hardware-for-ws80","title":"Ecowitt Sensor Mounting Hardware for WS80","description":"\u003cp\u003eSensor mounting hardware suitable for a number of external sensor packs with sonic anemometer:\u003c\/p\u003e\n\u003cp\u003eEcowitt\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGW1103 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003esonic \u003c\/span\u003esensor array\u003c\/li\u003e\n\u003cli\u003eHP2553 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003esonic \u003c\/span\u003esensor array\u003c\/li\u003e\n\u003cli\u003eHP2563 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003esonic \u003c\/span\u003esensor array\u003c\/li\u003e\n\u003cli\u003eWS80 sonic sensor array\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComprises:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x threaded U brackets\u003c\/li\u003e\n\u003cli\u003e4 x bolts\u003c\/li\u003e\n\u003cli\u003e4 x sprung washers\u003c\/li\u003e\n\u003cli\u003e1 x mounting arm fixing nut and bolt\u003c\/li\u003e\n\u003cli\u003e1 x spanner\u003c\/li\u003e\n\u003cli\u003e1 x flat blade screwdriver \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43797964292312,"sku":"ECOWFIXKITWS80","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Sensor_Mounting_Hardware_for_WS80_abc0c5585929edde-compressed.webp?v=1779123129"},{"product_id":"ecowitt-wh40-rain-bucket-extension","title":"Ecowitt WH40 Rain Funnel Extension","description":"\u003cp\u003eAdd the Ecowitt WH40 rain funnel height extension to improve readings in heavier rain when water may bounce out of the bucket.\u003c\/p\u003e\n\u003cp\u003eCan be used with the rain bucket bird deterrent spike kit which is used to hold this in place. We also sell a separate jubilee clip should the spikes not be in use.\u003c\/p\u003e\n\u003cp\u003eSuitable for use with the following Ecowitt and other product rain gauges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWH40 rain gauge\u003c\/li\u003e\n\u003cli\u003eWH5360 station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGW1002 \/ GW1102 \/ GW1003 \/ GW1103 station\u003c\/li\u003e\n\u003cli\u003eHP2552 \/ HP2562 \/ HP2553 \/ HP2563 station\u003c\/li\u003e\n\u003cli\u003eHP3501 station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAmbient WS-5000 series station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFroggit HP1000SE station\u003c\/li\u003e\n\u003cli\u003eFroggit DP80 rain gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAfter installation, please ensure that the bucket is twisted into place until a click is heard to avoid loss in high winds.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43818088071384,"sku":"ECOWH40EXN","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_WH40_Rain_Funnel_Extension_7c0e04592617596f-compressed.webp?v=1779123132"},{"product_id":"jubilee-clip-for-ecowitt-wh40-rain-bucket-extension","title":"Ecowitt WH40 Rain Funnel Extension Jubilee Clip","description":"\u003cp\u003eIf you are not using the anti bird spike kit then you may require a jubilee clip to hold the WH40 extension in place. \u003c\/p\u003e\n\u003cp\u003eThe clip is the correct length to hold the extension in place on the following rain gauges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWH40 rain gauge\u003c\/li\u003e\n\u003cli\u003eWH5360 station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGW1002 \/ GW1102 \/ GW1003 \/ GW1103 station\u003c\/li\u003e\n\u003cli\u003eHP2552 \/ HP2562 \/ HP2553 \/ HP2563 station\u003c\/li\u003e\n\u003cli\u003eHP3501 station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAmbient WS-5000 series station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFroggit HP1000SE station\u003c\/li\u003e\n\u003cli\u003eFroggit DP80 rain gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAfter installation, please ensure that the bucket is twisted into place until a click is heard to avoid loss.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43839984992472,"sku":"ECOWH40JUBCLIP","price":5.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_WH40_Rain_Funnel_Extension_Jubilee_Clip_6f9d0b891e668344-compressed.webp?v=1779123256"},{"product_id":"ecowitt-additional-solar-panel-for-ws6006-4g-weather-station","title":"Ecowitt Additional Solar Panel for WS6006 Weather Station","description":"\u003cp\u003e\u003cspan\u003eSecond or replacement solar panel for use with the Ecowitt WS6006 4G weather station.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn low light areas it may be beneficial to add a second solar panel to the WS6006 to help charge the battery running the mobile data gateway, especially during winter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolar panel \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwin connecting lead to join two or more panels together\u003c\/li\u003e\n\u003cli\u003eFor use with Ecowitt WS6006 4G weather station only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Solar panel in frame\u003c\/li\u003e\n\u003cli\u003e1 x twin panel connecting lead\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x mounting kit set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eTechnical\u003c\/h5\u003e\n\u003cp\u003eTechnical information for the panel\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem; display: inline !important;\"\u003eVoltage: 6.2v maximum\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmperage : 500mA\u003c\/li\u003e\n\u003cli\u003eSize: 195*138mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43852077629656,"sku":"ECOWWS6006SOALR","price":42.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Additional_Solar_Panel_for_WS6006_Weather_Station-compressed.webp?v=1779123264"},{"product_id":"eu-usb-power-adapter-5v","title":"EU USB Power Adapter 5v","description":"\u003cp\u003eStandard USB power adapter for use with a number of weather station products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5V \/ 2 Amp output\u003c\/li\u003e\n\u003cli\u003e1 x USB A port\u003c\/li\u003e\n\u003cli\u003e90 degree angle to stay closer to the wall\u003c\/li\u003e\n\u003cli\u003eEU CE approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequired for mains powered Ecowitt models.\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43852371296472,"sku":"GENUSBEUPSU5V","price":8.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/EU_USB_Power_Adapter_5v_743ed3b6a3cd1927-compressed.webp?v=1779123309"},{"product_id":"small-closed-radiation-shield-plate-see-description","title":"Small Closed Radiation Shield Plate (see description)","description":"\u003cp\u003eA replacement closed radiation shield plate which screws into the base of the \u003cspan\u003ea number of \u003c\/span\u003eweather station external sensor suites protecting the temperature and humidity sensor.\u003c\/p\u003e\n\u003cp\u003eThis plate is normally the lower two of the sensor screen (plates 4 and 5 from the top).\u003c\/p\u003e\n\u003cp\u003eSuitable for use with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGARNI 940\u003c\/li\u003e\n\u003cli\u003eVentus W830\u003c\/li\u003e\n\u003cli\u003eEcowitt GW1001, GW1100, HP2551, HP2561, HP3500B, WH2320, WH2910, WS6006\u003c\/li\u003e\n\u003cli\u003eOregon Scientific WMR580 \/ AL580 Sensor\u003c\/li\u003e\n\u003cli\u003eAlecto WS-5500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease ensure that this is orientated correctly to avoid alignment errors before fixing into place.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43900227748056,"sku":"ECOWPLATESOLID","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Small_Closed_Radiation_Shield_Plate_see_description_d7caab7aa707e604_ee419a61ac15238e-compressed.webp?v=1779123373"},{"product_id":"small-open-radiation-shield-plate-see-description","title":"Small Open Radiation Shield Plate (see description)","description":"\u003cp\u003eA replacement open radiation shield plate which screws into the base of the \u003cspan\u003ea number of \u003c\/span\u003eweather station external sensor suites protecting the temperature and humidity sensor.\u003c\/p\u003e\n\u003cp\u003eThis is normally plates 2 and 3 from the top where the temperature and humidity sensor is located.\u003c\/p\u003e\n\u003cp\u003eSuitable for use with\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGARNI 940\u003c\/li\u003e\n\u003cli\u003eVentus W830\u003c\/li\u003e\n\u003cli\u003eEcowitt GW1001, GW1101, HP2551, HP2561, HP3500B, WH2320, WH2910, WS6006, WH40\u003c\/li\u003e\n\u003cli\u003eOregon Scientific WMR580 \/ AL580 Sensor\u003c\/li\u003e\n\u003cli\u003eAlecto WS-5500\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease ensure that this is orientated correctly to avoid alignment errors before fixing into place.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":43900230566104,"sku":"ECOWPLATEOPEN","price":6.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Small_Open_Radiation_Shield_Plate_see_description_954500504f862e2e_0aa3009dbc952805-compressed.webp?v=1779123377"},{"product_id":"copy-of-ecowitt-temperature-humidity-sensor-with-blue-plug-type-3-see-description-for-compatibility","title":"Ecowitt Temperature \u0026 Humidity Sensor (Blue plug - please see important notes)","description":"\u003cp\u003eA temperature \u0026amp; humidity sensor designed for harsh environments. Used in newer models of the WH65, WS69 and WS80 outdoor sensor array. Designed extend product life with a new outer cap and ceramic shield protecting the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for the WS90 WittBoy - see our type 4s product.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease ensure that your existing sensor is the new keyed style sensor with \u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eblue\u003c\/strong\u003e\u003c\/span\u003e socket to ensure compatibility by removing the lower sections of the radiation shield and also note the important detail above.\u003c\/p\u003e\n\u003cp\u003eEasily replaced part by removing two screws on the underside of the heat shield and removing the lower plates. Ensure that you do not handle the sensor with bare hands to prevent contamination and only touch the edge of the sensor when installing not the flat surface.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eInstructions for installation included with sensor.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":44253892182232,"sku":"FG-0WH65MTH-001","price":21.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Temperature___Humidity_Sensor__Blue_type_3S_-_see_details_for_compatibility-compressed.webp?v=1779123729"},{"product_id":"copy-of-ecowitt-temperature-humidity-sensor-blue-plug-type-4s-see-description-for-compatibility","title":"Ecowitt WS90 Temperature \u0026 Humidity Sensor (Blue type 4S)","description":"\u003cp\u003eHarsh environment replacement sensor for the newer WS90 WittBoy outdoor sensor array. Designed for use on areas with salt spray and strong winds or extreme environments with a new outer cap and ceramic shield protecting the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly suitable for the WS90 WittBoy array.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease ensure that your existing WS90 sensor is the new keyed style sensor with \u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eblue\u003c\/strong\u003e\u003c\/span\u003e socket to ensure compatibility by removing the lower sections of the radiation shield.\u003c\/p\u003e\n\u003cp\u003eEasily replaced part by removing three screws on the underside of the heat shield and removing the lower plates. Ensure that you do not handle the sensor with bare hands to prevent contamination and only touch the edges of the sensor or plug when installing.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eInstructions for installation included with sensor.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":44253917413592,"sku":"ECO-WS90MTH-003","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Temperature___Humidity_Sensor__Blue_type_4S_-_WS90-compressed.webp?v=1779123736"},{"product_id":"ecowitt-replacement-table-stand-for-hp2560-console","title":"Ecowitt Table Stand for HP2560 Console","description":"\u003cp\u003eReplacement console stand for the Ecowitt HP2650 console. \u003c\/p\u003e\n\u003cp\u003eDirect replacement for any customer that has misplaced or damaged the one supplied with the HP2560 colour TFT display.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":45220142186712,"sku":"ECOWHP2560STAND","price":9.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Table_Stand_for_HP2560_Console-compressed.webp?v=1779124276"},{"product_id":"rain-tipping-mechanism-with-magnet-for-various-stations","title":"Rain Tipping Spoon for Various Stations with Optional Temperature \u0026 Humidity Sensor","description":"\u003cp\u003eA replacement rain tipping mechanism which screws into the bucket base of \u003cspan\u003ea number of \u003c\/span\u003eweather station external sensor suites under the black rain collection funnel. As an option we also have the replacement temperature \u0026amp; humidity sensor along with the sensor shield preinstalled for a simpler installation. \u003c\/p\u003e\n\u003cp\u003eThe temperature and humidity sensor is the new improved model with the ceramic filter to extend sensor life in harsh environments.\u003c\/p\u003e\n\u003cp\u003eUsed in the following external sensor packs as well as others.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGARNI 940\u003c\/li\u003e\n\u003cli\u003eVentus W830\u003c\/li\u003e\n\u003cli\u003eEcowitt WS68, WS69 Sensors\u003c\/li\u003e\n\u003cli\u003eOregon Scientific WMR580 \/ AL580 Sensor\u003c\/li\u003e\n\u003cli\u003eAlecto WS-5500\u003c\/li\u003e\n\u003cli\u003eAmbient Weather WS-1553-IP, WS-1900 OSPREY, WS-1965, WS-2000 \u0026amp; WS2902\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Rain Sensor with Temperature \u0026 Humidity Sensor","offer_id":56385664942458,"sku":"ECOWRAINSPOONT\u0026H","price":29.0,"currency_code":"GBP","in_stock":true},{"title":"Rain Sensor Spoon in Enclosure Only","offer_id":56385664909690,"sku":"ECOWRAINSPOON","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/e709681f36c4ed00cd58fb3e8e037f24_jpg_475a5909a744c53f_d825de2612f4b23b-compressed.webp?v=1779124283"},{"product_id":"ecowitt-temperature-humidity-sensor-with-heater-compensation-ws90","title":"Ecowitt WS90 Temperature \u0026 Humidity Sensor with Heater Compensation","description":"\u003cp\u003eNot required as an upgrade for the WS90s purchased after October 2025, but suitable for WS90s prior to this as an upgrade or replacement item. \u003cstrong\u003eThe WS90 MUST be running firmware v1.4.0 or above.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHarsh environment replacement sensor for the newer WS90 WittBoy outdoor sensor array. Designed specifically for use with the WS90 where a heater is used for ice removal and in extreme environments with a new filter cap and ceramic shield protecting the sensor and further outer secondary shield\u003c\/p\u003e\n\u003cp\u003ePlease ensure that your existing WS90 sensor is the new keyed style sensor with \u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eblue\u003c\/strong\u003e\u003c\/span\u003e socket to ensure compatibility by removing the lower sections of the radiation shield.\u003c\/p\u003e\n\u003cp\u003eEasily replaced part by removing three screws on the underside of the heat shield and removing the lower plates. Ensure that you do not handle the sensor with bare hands to prevent contamination and only touch the edges of the sensor or plug when installing.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eInstructions for installation in the WS90 included with sensor.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":54915285254522,"sku":"ECO-WH90MTH-004","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Temperature___Humidity_Sensor_with_Heater_Compensation__WS90-compressed.webp?v=1779124752"},{"product_id":"heightened-rain-funnel-with-bird-spikes-for-wh40-others","title":"Heightened Rain Funnel with Bird Spikes for WH40 \u0026 Others","description":"\u003cp\u003eA revised large rain collection bucket\/funnel which locks into the top of your existing \u003cspan\u003eEcowitt WH40 rain sensor. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe increase in height reduces rain splashing out of the funnel and also bird deterrent spikes are also included as standard to reduce perching and pooping in the bucket. Rain is captured through the 180mm diameter top and channelled through a 5mm hole at the base for measurement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for use with the following Ecowitt product rain gauges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWH40 rain gauge\u003c\/li\u003e\n\u003cli\u003eWH5360 station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGW1002 \/ GW1102 \/ GW1003 \/ GW1103 stations\u003c\/li\u003e\n\u003cli\u003eHP2552 \/ HP2562 \/ HP2553 \/ HP2563 stations\u003c\/li\u003e\n\u003cli\u003eHP3501 station\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlso suitable for the following third party products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAmbient WS-5000 series station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFroggit HP1000SE station\u003c\/li\u003e\n\u003cli\u003eFroggit DP80 rain gauge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease ensure that this is twisted into place until a click is heard to avoid loss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnsuitable as a device for collecting rain for a water butt. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":54973628023162,"sku":"ECOWH40HIFUN","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Heightened_Rain_Funnel_with_Bird_Spikes_for_WH40_Others_2d4402ac20222976_5a7b276081f43071-compressed.webp?v=1779124813"},{"product_id":"temperature-humidity-array-plate-sensor-type-1-see-description-for-compatibility-copy","title":"Temperature \u0026 Humidity Array Plate Sensor (type 1s - see description for compatibility)","description":"\u003cp\u003eReplacement plate style temperature and humidity sensor specifically for older 7-in-1 sensor arrays where the sensor is glued to the plate and has a cloth filter.\u003c\/p\u003e\n\u003cp\u003eThis replacement adds both a plug-in temperature and humidity sensor and a new ceramic protection filter making future maintenance easier and improving reliability in wet and windy conditions\u003c\/p\u003e\n\u003cp\u003eAlso suitable for the Ventus W830 and GARNI 940 weather stations along with a number of Ambient weather stations.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCannot be used with Bresser weather stations or Ecowitt WS90 models.\u003c\/span\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":54973734453626,"sku":"ECO-WH65MTH-003","price":23.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Temperature___Humidity_Array_Plate_Sensor__type_1_-_see_description_for_compatibility-compressed.webp?v=1779124820"},{"product_id":"sensor-mounting-hardware-and-arm-for-ws85-sensor","title":"Sensor Mounting Hardware \u0026 Arm for WS85 Sensor","description":"\u003cp\u003eSensor mounting hardware designed specifically for the WS85 outdoor sensor array.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e2 U bolts\u003c\/li\u003e\n\u003cli\u003e4 fixing bolts\u003c\/li\u003e\n\u003cli\u003eMounting screw\u003c\/li\u003e\n\u003cli\u003eFlexible mounting bracket\u003c\/li\u003e\n\u003cli\u003eAllen key\u003c\/li\u003e\n\u003cli\u003eSpanner\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55031351181690,"sku":"ECOWS85SENSORKIT","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Sensor_Mounting_Hardware_Arm_for_WS85_Sensor_50023903d31b573d_90e3007355b30f53-compressed.webp?v=1779124831"},{"product_id":"ecowitt-sd13-to-usb-charge-cable-for-ws6210-4g-gateway","title":"Ecowitt SD13 to USB Charge Cable for WS6210 4G Gateway","description":"\u003cp\u003eEcowitt SD13 to USB Charge Cable for WS6210 4G Gateway.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA replacement cable to connect the WS6210 via the SD13 port to a USB charger to top up the batteries. \u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSD13 cable with waterproof connection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e50cm length of cable\u003c\/li\u003e\n\u003cli\u003eUSB type A connection for wall charger (not included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 x SD13 to USB-A cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55060601176442,"sku":"ECOWWS6210SD13USB","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_SD13_to_USB_Charge_Cable_for_WS6210_4G_Gateway_0b44df0065d9f856_073554afddd6bbbc-compressed.webp?v=1779124831"},{"product_id":"pole-mounting-accessory-for-wh40","title":"Pole mounting accessory for WH40 \/ WH40H","description":"\u003cp\u003eA revised mounting bracket allowing your WH40 or WH40H rain gauge to be mounted on the side of a pole rather than the top\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSuitable for use with the following Ecowitt product rain gauges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWH40 and WH40H rain gauge\u003c\/li\u003e\n\u003cli\u003eWH5360 rain station\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGWxxxx models that include a separate rain gauge\u003c\/li\u003e\n\u003cli\u003eHPxxxx models that include a separate rain gauge\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRain gauge shown is not included.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55122105467258,"sku":"ECOWH40PBRAK","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Pole_mounting_accessory_for_WH40-compressed.webp?v=1779124869"},{"product_id":"ecowitt-ws80-complete-mounting-arm-bracket","title":"Ecowitt WS80 Complete Mounting Arm \u0026 Bracket","description":"\u003cp\u003eReplacement arm and mounting accessories for the WS80 sonic anemometer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMount has four holes pre drilled for fitting to the pole along with a fixing screw to hold the WS80 anemometer arm in place and stop it rotating. Arm mounted at 90 degrees for correct sensor position.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55288558780794,"sku":"ECOWWS80MOUNT","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_WS80_Complete_Mounting_Arm___Bracket-compressed.webp?v=1779124882"},{"product_id":"secondary-solar-panel-for-ws6210-4g-weather-station","title":"Solar Panel for WS6210 4G Weather Station","description":"\u003cp\u003e\u003cspan\u003eSecondary or replacement solar panel for use with the Ecowitt WS6210 4G weather station.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn low light areas it may be beneficial to add a second solar panel to the WS6210 to help charge the batteries running the mobile data gateway, especially during winter.\u003c\/p\u003e\n\u003cp\u003eOptions availabe are either a complete solar panel kit with Y cable, a replacement solar panel without Y cable or just a replacement Y cable.\u003c\/p\u003e\n\u003cp\u003eImage showing two solar panels is to demonstrate connection method, only one panel is included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolar panel in frame\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwin connecting lead to join two or more panels together (if selected)\u003c\/li\u003e\n\u003cli\u003eMounting accessories\u003c\/li\u003e\n\u003cli\u003eFor use with Ecowitt WS6210 4G weather station only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ecowitt","offers":[{"title":"Secondary Solar Panel with Y cable \/ fixings","offer_id":56922940735866,"sku":"EC-6210SOLAR-001","price":59.0,"currency_code":"GBP","in_stock":true},{"title":"Solar Panel with fixings (no Y cable)","offer_id":56922940768634,"sku":"EC-6210SOLAR-002","price":49.0,"currency_code":"GBP","in_stock":false},{"title":"Replacement Y cable","offer_id":56922940801402,"sku":"EC-6210SOLAR-003","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Secondary_Solar_Panel_for_WS6210_4G_Weather_Station-compressed.webp?v=1779124933"},{"product_id":"new-piezo-rain-sensor-solar-radiation-uv-solar-panel-assembly-for-ws90","title":"Replacement Piezo Rain, Solar \u0026 UV Sensor for WS90","description":"\u003cp\u003eA replacement or upgraded sensor top for the WS90 array. Includes the revised rain detection sensor with slanted top, the solar radiation sensor, UV and also solar panel to provide supplementary power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly suitable for the WS90 WittBoy array.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eInstructions for installation available from Ecowitt \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/6539\/5874\/files\/WS85_WS90_installation.jpg\" title=\"Installation instructions for WS90 top sensor\"\u003ehere.\u003c\/a\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55386019201402,"sku":"ECOWBLUEWS90TOP","price":32.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/New_Piezo_Rain__Solar___UV_Sensor_Assembly_for_WS90-compressed.webp?v=1779124941"},{"product_id":"ecowitt-ultrasonic-anemometer-heater-power-supply-copy","title":"Ecowitt Ultrasonic Anemometer Heater Power Supply","description":"\u003cp\u003eThis power supply for use with the option of 10 or 20 meter cable provides power for the heater element in the Ecowitt Ultrasonic anemometers.\u003c\/p\u003e\n\u003cp\u003eUsing an optional heater helps to keep snow and ice clear of the wind sensor plate gauze improving readings in subzero temperatures and also provides an additional power source for the WS90 (WittBoy) in dark\u003cspan\u003e \u003c\/span\u003elocations.\u003c\/p\u003e\n\u003cp\u003eWe ensure that the power adapter is supplied with a UK, European or North American mains plug. The power transformer should be housed in a dry location, ideally indoors and only the low voltage cable placed outdoors.\u003c\/p\u003e\n\u003cp\u003eThis item is suitable for use with the following units which include the sonic anemometer:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWS80 Sonic array\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWS90 Sonic array with haptic rain sensor\u003c\/li\u003e\n\u003cli\u003eHP2553 weather station\u003c\/li\u003e\n\u003cli\u003eHP2654\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eWittBoy\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ePro\u003c\/li\u003e\n\u003cli\u003eGW1003\/GW1103\/GW1203 weather stations\u003c\/li\u003e\n\u003cli\u003eGW2001\u003cspan\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eWittBoy\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe 120\/220v power transformer must be located indoors, the 12 volt cable can safely be used outdoor.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan face=\"arial, helvetica, sans-serif\"\u003eIncludes\u003c\/span\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003ePower transformer with UK, European or North American plug - based on delivery address\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55412561215866,"sku":"ECOWSONICPSU","price":39.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt_Ultrasonic_Anemometer_Heater_Power_Supply-compressed.webp?v=1779124999"},{"product_id":"poe-splitter-5v-usb-output","title":"PoE Splitter 5v Output for Gateways and Consoles","description":"\u003cp\u003eAn indoor rated PoE splitter specially designed for complex backhaul and networking applications.\u003c\/p\u003e\n\u003cp\u003eEnclosed in an IP40 fire retardant plastic case with compact design. It works as a converter to get power and data from PoE injector or PoE Switch of 802.3af\/at over RJ45 connector then separate power and data to Ecowitt consoles and gateway devices.\u003c\/p\u003e\n\u003cp\u003eIdeal for the GW2000 and GW3000 products where a RJ45 connection is used. The output power is 5v dc, 2.0Amps via a USB-A Female connector and data is split into a separate data signal at 10\/100Mbps via RJ45 male.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x RJ45 female input for PoE injection from network\u003c\/li\u003e\n\u003cli\u003eEither:\n\u003cul\u003e\n\u003cli\u003e1 x USB-A female port at 5v 2.0 Amps for GW3000 \u0026amp; consoles\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Barrel connector for GW2000 gateway\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x RJ45 male output for data\u003c\/li\u003e\n\u003cli\u003e10\/100mbps speed\u003c\/li\u003e\n\u003cli\u003eCE approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRequires PoE network switch or PoE injector.\u003cbr\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"USB","offer_id":55816282767738,"sku":"ECOWPOEUSB","price":25.0,"currency_code":"GBP","in_stock":true},{"title":"Barrel Connector","offer_id":55816282800506,"sku":"ECOWPOEBAR","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/PoE_Splitter_5v_Output_for_Gateways_and_Consoles_4578336834d25abf_7f0d10cbd090205d-compressed.webp?v=1779125005"},{"product_id":"enhanced-omnidirectional-antenna-for-gw3000-gateway","title":"Enhanced Omnidirectional Antenna for GW3000 Gateway","description":"\u003cp\u003eLooking to extend the reception range of the GW3000 Gateway to pick up those distance sensors over a 100 meters from the base then this is for you.\u003c\/p\u003e\n\u003cp\u003eA high quality carbon-steel omnidirectional antenna with magnetic base and 3 meter cable to allow it to be located away from sources of interference offering over double the normal reception range of the standard antenna.\u003c\/p\u003e\n\u003cp\u003eTests in an open field environment increased the WH51 sensor reception from the 100 meters stated to 220 meters and the WS90 from 150 meters to 350 meters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant: Ensure that the antenna is a minimum of 50cm from the GW3000 gateway and your home WiFi router to avoid interference.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"130\" data-start=\"80\"\u003e360° omni-directional antenna with magnetic base\u003c\/li\u003e\n\u003cli data-end=\"180\" data-start=\"134\"\u003eSpecifically designed for the GW3000 gateway\u003c\/li\u003e\n\u003cli data-end=\"217\" data-start=\"184\"\u003eRange up to 350 meters (open areas)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"299\" data-start=\"262\"\u003e3M SMA cable\u003c\/li\u003e\n\u003cli data-end=\"299\" data-start=\"262\"\u003eMale\/female SMA adapter included\u003c\/li\u003e\n\u003cli\u003eOptional 5M extension cable (≈25% signal loss)\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eTechnical\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eAntenna Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eMagnetic Mount Antenna\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFrequency Range\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e(868MHz)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eInput Impedance\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e50Ω\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eV.S.W.R\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u0026lt; 2.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eGain\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e0.9dBi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePolarization Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eVertical\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003ePower capacity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e50W\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDimensions\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e110 × ⌀30mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eConnector Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eSMA-K (Female, inner thread \u0026amp; pinhole)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCable Type\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eRG174\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCable Length\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e3M\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eMaterial\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eCarbon Steel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e50g\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eRoHS Compliance\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eYes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eOperating Temperature\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e-45c ~ +85c\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":55639767908730,"sku":"ECOWOMNIANT","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Enhanced_Omnidirectional_Antenna_for_GW3000_Gateway-compressed.webp?v=1779125058"},{"product_id":"ecowitt-console-power-cable-to-usb-plug","title":"Ecowitt Console Barrel to USB Plug Power Cable","description":"\u003cp\u003eEcowitt USB Power Cable for Consoles.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSuitable to a selection of consoles as below\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChoice of two plug styles:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e2.5mm for WN1900, WN1910, WN1920, WN1820 or HP3500 console\u003c\/li\u003e\n\u003cli\u003e3.5mm for \u003cspan\u003eWS3900, WS3800, HP2560, HP2550, WS2910, WS2320 console or GW2000 gateway\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e150cm length of cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB type A connection for power adapter (not included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 x console \/ gateway power cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Ecowitt","offers":[{"title":"3.5mm to USB","offer_id":55696974807418,"sku":"ECOWPOWERUSB3.5","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"2.5mm to USB","offer_id":55696974774650,"sku":"ECOWPOWERUSB2.5","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Ecowitt-Barrel-Console-Power-2.5mm-compressed.webp?v=1779125137"},{"product_id":"ws90-threaded-locking-pole-mount-plate","title":"WS90 Threaded Locking Pole Mount Plate","description":"\u003cp\u003eA replacement lower locking mount for the WS90 array.\u003c\/p\u003e\n\u003cp\u003eOriginal bottom plate will require removing completely with the plate being cut to free the heater cable. The new plate includes provision for the threading through of the cable without damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnly suitable for the WS90 WittBoy array.\u003c\/strong\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0548\/6539\/5874\/files\/WS85_WS90_installation.jpg\" title=\"Installation instructions for WS90 top sensor\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":56126137794938,"sku":"ECOWWS90FIX","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/WS90-lower-plate-threaded-compressed.webp?v=1779125292"},{"product_id":"replacement-plate-holder-for-temperature-humidity-sensor-type-1-see-description-for-compatibility-copy","title":"Replacement Plate Holder for blue Plug Temperature \u0026 Humidity Sensor","description":"\u003cp\u003eReplacement new style plate designed to hold a temperature and humidity sensor specifically for a 7-in-1 sensor array. The temperature \u0026amp; humidity sensor is NOT INCLUDED as this is a replacement part for an existing sensor array.\u003c\/p\u003e\n\u003cp\u003ePlease check your existing plate to see whether it has a blue plug prior to purchase. Ideal for customers that may have damaged the pins in the blue plug.\u003c\/p\u003e\n\u003cp\u003eSuitable for current Ecowitt 7-in-1 WS69 sensor array along with newer models of the Ventus W830 and GARNI 940 weather stations and a number of Ambient weather stations.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCannot be used with Bresser weather stations or Ecowitt WS80 or WS90 models\u003c\/span\u003e.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":56295629980026,"sku":"ECO-WH65MTH-PLT","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/Array_Plate_Sensor_blue_plug-compressed.webp?v=1779125409"},{"product_id":"ecowitt-lds01-laser-depth-sensor-extended-cover-for-blizzards","title":"Ecowitt LDS01 Laser Depth Sensor Extended Cover for Blizzards","description":"\u003cp\u003eEcowitt has observed that when the LDS01 sensor is used during strong wind and heavy snowfall conditions, wind blown snow may accumulate on the laser sensor optical surface. \u003c\/p\u003e\n\u003cp\u003eUnder low temperatures, this can lead to frost forming on the laser optical surface, which may temporarily affect measurement stability.\u003c\/p\u003e\n\u003cp\u003eThe device's internal heating is intentionally controlled to balance performance across different temperature conditions and to avoid overheating.  As a result, in extreme blizzard conditions, frost on the optical surface cannot always be completely cleared by heating alone.\u003c\/p\u003e\n\u003cp\u003eBased on this scenario, Ecowitt has designed a revised protective cone for you should you need it This is designed to help reduce direct snow ingress into the device in heavy snow environments.\u003c\/p\u003e\n\u003cp\u003eAs many customers do not have access to a 3D printing service to create a precision unit themselves we have arranged production of this for you and are selling these at cost price.\u003c\/p\u003e\n\u003cp\u003eFor those with access to a 3D printer, Ecowitt have made the designs available free of charge and these are the ones we have used for our pre-printed products.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/Ecowitt\/Blueprint_Sharing\" title=\"3D print design for snow cover\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/github.com\/Ecowitt\/Blueprint_Sharing\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eRemember that the protective cover is not required for normal operation.  It is recommended only for areas with frequent blizzards or strong winds, where it can help improve measurement stability.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNote: Sensor in image is NOT included.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e1 x ABS Snow Cone Extension for LDS01 Sensor \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":56526139588986,"sku":"ECOWLDS01SC","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/IMG_7989-compressed.webp?v=1779125649"},{"product_id":"ecowitt-temperature-humidity-barometric-sensor-please-check-important-notes","title":"Ecowitt Temperature, Humidity \u0026 Barometric Sensor (please check important notes)","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(43, 0, 255);\"\u003eBefore ordering this item for the WH65, WS69 or WS80 array please check the sensor ID on the silver label under the unit (see picture). This product is \u003cspan style=\"text-decoration: underline;\"\u003eonly\u003c\/span\u003e compatible with 4 digit sensor IDs, not 2 character IDs. If you have a 2 character model, please contact us for further assistance. \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA new harsh environment replacement sensor for the newer WH65, WS69 and WS80 outdoor sensor array giving temperature, humidity and atmospheric pressure readings. Designed extend product life with a new outer cap and ceramic shield protecting the sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for the WS90 WittBoy - see our type 4s product.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease ensure that your existing sensor is the new keyed style sensor with \u003cspan style=\"color: #2b00ff;\"\u003e\u003cstrong\u003eblue\u003c\/strong\u003e\u003c\/span\u003e socket to ensure compatibility by removing the lower sections of the radiation shield and also note the important detail above.\u003c\/p\u003e\n\u003cp\u003eEasily replaced part by removing two screws on the underside of the heat shield and removing the lower plates. Ensure that you do not handle the sensor with bare hands to prevent contamination and only touch the edge of the sensor when installing not the flat surface.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eInstructions for installation included with sensor.\u003c\/p\u003e","brand":"Ecowitt","offers":[{"title":"Default Title","offer_id":56583519863162,"sku":"FG-0WH65MTH-004","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0118\/0375\/4592\/files\/FG-1600x600-_1_de737e0c-c0ee-400c-b55a-13851d230505_jpg_bfd91412298336e8_ee7bba02598cabc2-compressed.webp?v=1779125656"}],"url":"https:\/\/weatherspares.co.uk\/collections\/ecowitt-1yr-warranty.oembed","provider":"Weather Spares","version":"1.0","type":"link"}